Duke ReadyFlex RFHU-35M - RFHU Operating Instructions - About and Network; About; Network; Tools Menu

15
RFHU - Multiuse Operator’s Manual
RFHU OPERATING INSTRUCTIONS  Continued
Tools Menu
The following congurations are available on the TOOLS
menu.
The “About” screen will detail specic settings
available to the RFHU.
About
This will include the unit’s serial number, API key,
rmware version along with the unique network
MAC address used for both WiFI and ethernet
connectivity.
Network
The Network Cong option will allow the RFHU
network connection to be congured. After
selecting “Network Cong” the following screen will
load.
Network Cong can be set to “Read Only” mode if
the access is locked within Tools menu. Alternatively,
if “Network” is unlocked in the Access menu then
changes can be made to the selected network.
The RFHU supports both WiFi and Ethernet connec-
tions. In each network mode, both automatically
assigned IP addresses (DHCP) and manually entered
static IP addresses are supported.
To modify Network Settings rst ensure that Net-
work Settings are unlocked in the Access Menu
(they are by default). Then enter the “Network” op-
tion found within the “Tools” menu.