RFHU - Multiuse Operator’s Manual
20
RFHU OPERATING INSTRUCTIONS Continued
Duke Connected Equipment Platform (DCEP) Programming
The ReadyFlex™ Holding Unit can have its recipes
and well programming updated locally on the
RFHU Control as mentioned in previous sections.
Recipes and well programming can also be updated
via Duke’s cloud solution – the Duke Connected
Equipment Platform (DCEP).
The DCEP requires the user’s Account Name to be
dened along with a user login and password. This
can be created via the DCEP registration process
without the assistance of Duke Customer Service.
An option exists for this purpose on the connected.
dukemfg.com landing page – “Create an Account”.
The ReadyFlex™ Holding Unit can then be added
to the account using its serial number and API key
which can be found on the unit itself.
After logging onto the DCEP all connected devices
within the account will be displayed. Multiple RF-
HU’s are possible to be loaded within the account.
After selecting the “Dashboard” icon to connect to a
specic RFHU the programming grid will appear. As
this is a connected unit the unit conguration will
be detected automatically, for example a 2x2 RFHU
conguration appears below.
The RFHU programming grid will be color coded per
zone. Recipes programmed within each zone will
be required to be of the same top temperature and
bottom temperature.
Three MENU’s are available for selection for each
well. The three menu’s may be used as BREAKFAST,
LUNCH or DINNER. The “All Day” option can be used
when the well holds the exact same recipe for the
entire day.
To program a well select the dropdown boxes next
to each MENU. A list of available recipes will be
displayed.
To Next Page
Loading...
