14
Installation and Operation of: DUKE TSC3 Proofer Oven with Touch Screen Controls
PROOFER OVEN STARTUP
ELECTRICAL SHOCK HAZARD.
TASKS MUST BE PERFORMED BY A QUALIFIED
SERVICE TECHNICIAN OR ELECTRICIAN.
1. Have a qualied service technician or electrician
connect the Proofer Oven to the power supply.
2. Turn power on to the unit with the power switch
on the left side of the unit. Boot Screen is displayed
and automatically transitions to the Main Screen.
3. Turn the oven and proofer ON by touching the
and buttons located at the left of
the touch screen. The Oven, Proofer and Recipe
Buttons will turn to BLUE background. The
Oven and Proofer lights will turn on and start
preheating.
Figure: Main Screen
4. Verify Humidication of the proofer. Humidication
will begin automatically. Humidity level will be
controlled according to user-selected %RH set
point.
5. Check the door seals and make sure both doors
close completely.
6. If the unit does not power up correctly or if the
doors do not close and seal properly, call Duke
for assistance.
OPERATING INSTRUCTIONS
To Next Page
Loading...
