Duke TSC3-6/18 - PROGRAMMING CONTROLS - continued; CONFIG (CONFIGURATIONS)

22
Installation and Operation of: DUKE TSC3 Proofer Oven with Touch Screen Controls
• DATE/TIME – Reserved for future use.
NOTE: You must touch the button to save
the changes you made.
When complete, touch the button to go back
to the previous screen. Press multiple times to return
to the main screen.
Figure: Edit Recipe Name Screen
• LANGUAGE – Touching will display a list of
included languages.
a. Touch the preferred language button
that best meets your needs and press the
button to save.
Note: Not all languages are available.
b. Select Default Recipies on the conguration
screen to complete language change
and press the button twice to exit
programming.
PROGRAMMING CONTROLS  continued
• C/F SELECT – Touching will toggle between
CENTIGRADE MODE ENABLED and FAHRENHEIT
MODE ENABLED.
CONFIG CONFIGURATIONS
1. Touch the button for the setting you want to edit.
• DEFAULT RECIPE – Touching will reload factory
defaults.
• SYSTEM STATUS – Touching will display Proofer
Oven status.