Do you have a question about the Dune 4WD OUTBACK XL SWAG and is the answer not in the manual?
Lists actions to avoid around the swag fabric to prevent fire hazards.
Warns against using fuel-burning devices due to carbon monoxide risk.
Lists recommended actions for safety and swag longevity.
Explains condensation on polycotton canvas due to reduced air permeability.
Addresses potential seam seepage and its correction.
Explains how wind/rain can weaken structure and cause water pockets.
Describes the seasoning process to make the swag fully waterproof.
Advises drying completely before storage to prevent mildew.
Recommends lowering awnings to prevent water ponding during rain.
States the swag is for recreation, not as a dwelling.
Suggests insuring the swag against loss or damage.
Explains replacement/refund policy for major vs. minor failures.
Lists conditions under which the warranty is voided, like misuse.
Refers to Australian Consumer Law guarantees for quality.
Outlines the procedure for making a warranty claim at a store.
States that return shipping costs are the customer's responsibility.
Details required evidence for compensation claims.
Identifies the warranty provider and their contact information.
Identifies the component where poles are inserted for assembly.
Identifies the central pole used in the swag structure.
Identifies the pole used at the foot end of the swag.
Identifies the main pole used at the head end of the swag.
Lists all components included with the swag.
Advises mentioning the model number in all correspondence.
Emphasizes pitching the swag once before camping to familiarize with assembly.
Instruction to undo straps and unroll the swag for assembly.
Locates the pole pocket and identifies the poles by length.
Instructions for assembling and inserting the head pole into the swag.
Instructions for assembling and inserting the foot pole into the swag.
Instruction to open the top canvas and mesh panel for access.
Details on assembling and inserting the middle pole and securing it.
Instructions for attaching guy ropes to the swag for stability.
Explains the function of the touch-tape webbing loop at the head end.
Guides on sealing the swag for weather protection after assembly.
Advises ensuring proper pitching for water runoff during bad weather.
Recommends storing the swag unrolled to maintain mattress loft and canvas aeration.
Advises dismantling the swag in severe weather conditions.
First step in disassembly: releasing guy ropes.
Instructions to unzip, collapse, and disassemble poles.
Guides on removing pegs safely and storing them.
Instructions for flattening the swag and rolling it up.
Guides on packing the rolled swag and accessories into the carry bag.
Tips for reducing condensation contact leakage.
Advice on correcting seam leakage with sealer or wax.
How to avoid mildew and clean if it occurs.
Recommends patch kits for small tears and repairers for larger ones.
Instructions for fixing separated zippers and when to seek repair.
Advice to avoid leaving the swag in direct sunlight for too long.
Benefits of ground sheets for floor dampness and life.
Safe methods for removing pegs to prevent fabric damage.
Essential items for safety and personal well-being.
List of necessary items for camping and swag use.
List of essential cooking and dining equipment.
Items recommended for travel and navigation.
List of personal clothing and items for camping.
| Brand | Dune |
|---|---|
| Model | 4WD OUTBACK XL SWAG |
| Category | Tent |
| Type | Swag |
| Sleeping Capacity | 1 person |
| Dimensions | 215 cm x 110 cm x 85 cm |
| Weight | 9.5 kg |
| Material | Canvas |
| Water Resistance | Yes |
| Setup | Quick setup with pole system |
| Ventilation | Mesh windows and vents |