Need help?Do you have a question about the Dunlop VOLUME (X)8 and is the answer not in the manual?
Details the function of the INPUT, FX, TUNER, and OUTPUT jacks for signal control and connection.
Internal 50kΩ pot used for setting the minimum heel-down value.
Internal switch for reversing the foot/heel polarity function.
The pedal is a passive unit and does not require a power source to operate.
Recommended placement in the effects signal chain and tuner connection.
Instructions for using the pedal for volume swells and control.
Instructions for using the pedal to control effect parameters.
Procedure for adjusting the resistance of the pedal's rocker.
General| Expression Pedal Output | Yes |
|---|---|
| Taper | Audio |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Tuner Output | 1 x 1/4" |
| Input Impedance | 250 kOhm |
| Power Supply | 9V DC |
| Power Requirements | 9V DC |
| Output Impedance | 25 kΩ |
| Type | Volume/Expression Pedal |
| Impedance | 250 kΩ |
To Next Page