17
DUOTONE CLICK BAR MANUAL
ENGLISH
2. Rinse the opening with clean water. When doing so, move the mechanism of the Trim Unit back
and forth using the Winder. Pull the leading lines to gain tension on the system.
Pictures
43
+
44
page 27
CAUTION: IF THE CLICK BAR MECHANISM IS RUNNING WITH DIFFICULTY YOU HAVE TO OPEN IT
AND CLEAN IT WITH SOME SOAPY WATER USING AN OLD TOOTHBRUSH. ALTERNATIVELY YOU
CAN TAKE YOUR BAR TO YOUR LOCAL DEALER FOR A SERVICE. FOR TIPS AND TRICKS ON HOW TO
CLEAN YOUR BAR, FIND DETAILED VIDEO TUTORIALS ON OUR WEBSITE.
5.3. LINES
CAUTION: DEPENDING ON THE USAGE, SIGNS OF WEAR AND TEAR CAN OCCUR ON YOUR CLICK
BAR. BECAUSE OF THIS, WE ADVISE THAT YOU CHECK YOUR LEADER LINES FOR STRESS MARKS
EVERY 100 HOURS AND REPLACE IF NECESSARY. TO REPLACE THE LINES YOU’LL NEED TO REMO-
VE THE END CAPS FIRST. YOU CAN FIND AN IN-DEPTH TUTORIAL ON OUR WEBSITE.
Never expose your Click Bar to temperatures higher than 70°C. This level of heat can damage
the structure of the lines and cause them to shrink. Carry out checks on a regular basis and see
whether the lines are the same length. If they are not the same length, you can stretch them or
compensate for the dierence by replacing the supplied pigtails. You can find guidance and more
maintenance tips at www.duotonesports.com.
SERVICE AND MAINTENANCE
To Next Page
