276
c HELP Mode Function and Operation Procedures
chap.7
Interface Setting
Function setting
2
Interface setting
USB enable/disable
Parallel interface enable (Default) / disable
¡ Operation procedure
2.
Function setting
3.
1.
Enter
“
072
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-072
”
.
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.
To Next Page
Loading...