DUPLOMATIC E.M.6427 RELEASE 7.1 05-03
6427071-230-en 2
Contents
1. GENERAL INFORMATION 3
CODE OF THE CONTROL UNIT 3
IMPORTANT NOTE FOR SAFETY 3
EMC COMPLIANCE 3
TECHNICAL CARACTERISTICS OF THE CONTROL UNIT 4
2. ELECTRICAL CONNECTIONS 5
SUPPLY 5
POWER SUPPLY 230 VAC 3 Φ 5
POWER SUPPLY 230 VAC 2 Φ 5
POWER SUPPLY 24VDC FOR I/O 5
TECHNICAL SPECIFICATIONS FOR POWER TRANSFORMER DESIGN 5
I/O SIGNALS 6
OUTPUTS TO CNC 6
OUTPUTS TO ELECTROVALVE 6
INPUTS FROM CNC 6
SELECTION OF THE NUMBER OF POSITIONS 6
SELECTION OF LOW/HIGH INERTIA 6
SELECTION OF STANDARD/MAINTENANCE SPEED 6
CONNECTION BOX AND TERMINALS LAY-OUT 7
3. INTERFACING TO CNC 8
OPERATING FUNCTIONS 8
ZERO SEARCH 8
OPERATING FUNCTIONS DESCRIPTION 9
OPERATING FUNCTION N°0: EMERGENCY / RESET 11
OPERATING FUNCTION N°1,2,3: AUTOMATIC 11
OPERATING FUNCTION N°4: JOG 12
OPERATING FUNCTION N°5: SERVICE 12
OPERATING FUNCTION N°6: MAINTENANCE 12
OPERATING FUNCTION N °7: SAFETY 13
4. DIAGNOSTIC 15
ALARMS AND WARNINGS 15
EXTENDED ALARM DESCRIPTION/TROUBLESHOOTING 16
The information described in this manual may be subject to variations due to technical modifications.
DUPLOMATIC S.p.A. reserves the right to modify the contents of this manual without prior notice.
To Next Page
Loading...