Why is my DURA-SAT DUR-line SF 4000 BT not connecting to Bluetooth?
If you're experiencing issues with the DURA-SAT Camera Accessories not connecting via Bluetooth, first, make sure that Bluetooth is enabled on your smartphone. Also, the Sat-finder needs to have power from the receiver or multi-switch, otherwise the Bluetooth interface won't activate.
What to do if only the STRENGTH LEDs glow on DURA-SAT DUR-line SF 4000 BT?
If only the STRENGTH LEDs are lit on your DURA-SAT Camera Accessories, it means you're likely aiming at the wrong satellite. To fix this, continue turning the antenna until the QUALITY LEDs also illuminate.
Why are all LEDs off on my DURA-SAT DUR-line SF 4000 BT?
If all the LEDs are off on your DURA-SAT Camera Accessories, it indicates that the Sat-finder isn't getting any power. Check to ensure that the receiver or multi-switch connected to the “DC 13/18V” connection is turned on.
How to switch the audio signal on/off on DURA-SAT DUR-line SF 4000 BT?
To switch the audio signal on or off on your DURA-SAT Camera Accessories, either hold down the SAT button on the Satfinder for 2 seconds or use the app to switch off the sound signal.
General| Brand | DURA-SAT |
|---|---|
| Model | DUR-line SF 4000 BT |
| Category | Camera Accessories |
| Language | English |
To Next Page
