Getting Started
English - 22 -
Switching On/Off
To Switch the TV On
P+P-
To Switch the TV Off
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode, the standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
Store mode
YES
OK
Default PIN code can change depending on the
selected country.
If you are asked to enter a PIN code for viewing a
menu option, use one of the following codes: 4725,
0000 or 1234.
Aerial Installation
AERIALSearch Type
NOTE: You can press MENU button to cancel.
OK.
MENU
Cable Installation
CABLEOK
YES
OK
OK
Note: Searching duration will change depending on the
selected search step.
Media Playback via USB Input
You can connect a 2.5” and 3.5” inch (hdd with external power
supply) external hard disk drives or USB memory stick to your
TV by using the USB inputs of the TV.
IMPORTANT!
formatting.
First Time Installation - USB Connections