Duracell CEF14NC User Manual

CEF14
Charge Sizes: AA , AAA
Value Charger for NiMH Batteries
NiMH
Technical
Battery Charger:
Class 2, Integrated Power Supply
Plug:
Direct Plug-In Matches Local Requirements
Battery Type/Fit:
NiMH: 2 or 4 AA/HR6, NiMH: 2 or 4 AAA/HR03
Typical Weight:
207 g
Input:
100-240V AC, 50-60 Hz, 7w
Output:
AA/HR6: 3.0V DC 360 mA
AAA/HR03: 3.0V DC 180 mA
Operating Temp:
0°C - 35°C (32°F - 95°F)
Dimensions:
123 mm (H) x 72 mm (W) x 42 mm (D)
SAFETY Microprocessor Controlled
• Charge termination based on –dV/dt, temperature, and/or built-in timer
• Over-temperature shutoff- prevents overheat of cell
• Primary cell protection- will not charge non-rechargeable batteries
• Low voltage battery protection- prevents overheat and damage to cell
• Power protection circuit- resets whenever a battery is removed
Berkshire Corporate Park
Bethel, CT 06801 U.S.A.
Tel: Toll free 1.800.544.5454
Web: www.duracell.com
BATTERIES
Information and contents in this data sheet are for reference purposes only. They do not constitute any warranty and representation is
subject to change without notice. For most current information and further details, please contact Duracell.
*Charge rate and time is dependent on cell capacity, discharge state, and operating temperature.
BENEFITS Great Value, New Sleek & Compact Design, Convenient Wall Plug-In
FEATURES Independent Channel Charging
• Fully Charges cells in 6 hours*
• Charges both AA and AAA NiMH cells
• Ensures a full charge regardless of charge or battery capacity
LED Indicates Charge
• Red = Charging
• Green = Complete
• Flashing Red = Error/Abnormal battery or abnormal temperature
Maintenance Charge Keeps Cells Fresh
International Charge Capability- device can be used worldwide with suitable converter plug
Document #: CH-A

Duracell CEF14NC Specifications

General

Type	NiMH/NiCd Battery Charger
Input Voltage	100-240V AC
Number of Batteries Charged	4
Battery Size Supported	AA, AAA
Batteries Included	No
LED Indicator	Yes
Auto Shut-off	Yes
Overcharge Protection	Yes
Output Voltage	1.2V DC

Summary

Product Features

Independent Channel Charging

Fully charges cells in 6 hours, charges both AA and AAA NiMH cells, and ensures a full charge regardless of capacity.

LED Charge Indicator

Indicates charging status: Red for charging, Green for complete, Flashing Red for error or abnormal conditions.

Maintenance Charging

Keeps charged cells fresh and ready for use.

International Charge Capability

Device is usable worldwide with a suitable converter plug.

Safety Features

Microprocessor Control

Features charge termination based on -dV/dt, temperature, and timer; includes over-temperature, low-voltage, and primary cell protection.