Duraflo 60PRO130 - Product Specifications Overview; Specifications: Part 1 General; Specifications: Part 2 Products; Specifications: Part 3 Execution

- 16 -
Specications
SECTION 077200 - ROOF VENTS
PART 1 GENERAL
1.1 SECTION INCLUDES
A. Roof vents of the following types:
 1. Continuousridgevents.(WeatherPRORidge)
 2. Turbinevents.(WeatherPROTurboVent).
 3. Staticvents.(WeatherPRO75)(WeatherPro50)
  (WeatherPROSlantBack)(WeatherPRO  
  PROVentilator)
1.2 RELATED SECTIONS
A. Section 07310 - Asphalt Shingles: Rough-in and
installation requirements.
1.3 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Product Data: Manufacturer’s data sheets on each
product to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and
recommendations.
3. Installation methods.
1.4 QUALITY ASSURANCE
A. Manufacturer Qualications: Minimum 5 years
experience manufacturing similar products.
B. Installer Qualications: Minimum 2 years experience
installing similar products.
1.5 PRE-INSTALLATION MEETINGS
A. Convene minimum two weeks prior to starting
Work of this section.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Deliver and store products in manufacturer’s
unopened packaging bearing the brand name
and manufacturer’s identication until ready
for installation.
 B. Handling:Handlematerialstoavoiddamage.
1.7 PROJECT CONDITIONS
 A. Maintainenvironmentalconditions(temperature,
  humidity,andventilation)withinlimits
recommended by manufacturer for optimum
results. Do not install products under
environmental conditions outside manufacturer’s
recommended limits.
1.8 SEQUENCING
A. Ensure that products of this section are supplied to
aected trades in time to prevent interruption of
construction progress.
1.9 WARRANTY
A. Warranty: Provide manufacturer’s standard limited
warranty, and as follows:
1. WeatherPRO Ridge: 35 year limited warranty
2. WeatherPRO Turbo Vent: 35 year limited
warranty
3. WeatherPRO 75: 35 year limited warranty
4. WeatherPRO 50: 35 year limited warranty
5. WeatherPRO Slantback: 35 year limited warranty
6. WeatherPRO PROventilator: 35 year limited
warranty
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer:
Canplas Industries Ltd.; 500 Veterans Dr.
P.O. Box 1800, Barrie, ON, Canada
   L4M4V3.ASD.TollFreeTel:(800)461-1771.
  Tel:(705)726-3361.Fax:(705)726-2186.
Email: durao@canplas.com
Web: http://www.canplas.com
B. Substitutions: Not permitted.
C. Requests for substitutions will be considered in
accordance with provisions of Section 01600.
2.2 ROOF VENTS
A. Roof ventilation shall be from a single source
of Durao Roong Ventilation products
manufactured by Canplas Industries Ltd.
2.3 CONTINUOUS ROOF VENTS
A. Product: WeatherPRO Ridge as manufactured by
Canplas Industries Ltd.
1. Design: Internal baes and drainage openings
easily deect and direct away extreme weather.
Airfoil designed edge allows smooth airow over
the ridge line maximizing eective ventilation
from the attic space. TriFold exibility for use on
full range of pitches. Code regulated insect grill.
  NetFreeArea:18.3sq.in./lin.ft.(387sq.cm/lin.m).
 2. MiamiDadeHighVelocityHurricaneZone 
certied: NOA 05-0516.06.
SPEC NOTE: See www.arcat.com website for
MicrosoftWord(editable)document.
SPEC NOTE: Canplas LLC and Canplas Industries Ltd. are
members of the Aliaxis Group of companies, a global leader
of plastic solutions for uid transport in the eld of building
materials. The Aliaxis Group provides products for both
residential and commercial building markets, in new build and
renovation segments, as well as a wide range of solutions for
industrial and public utility applications.