The Duratool Battery Tester, Model D03406, is a versatile diagnostic tool designed for testing SLA (Sealed Lead Acid) and Lithium batteries, suitable for both in-vehicle and out-of-vehicle applications. It provides comprehensive analysis of battery health, cranking performance, and charging system functionality.
Function Description:
The device offers a main menu with several key functions:
- Quick Test: Provides a rapid assessment of battery condition.
- Battery In Vehicle: Tests the battery while it is installed in a vehicle, taking into account the vehicle's electrical system.
- Out Of Vehicle: Tests the battery independently, outside of a vehicle.
- Review Data: Allows users to access and review previously stored test results.
- Print Data: Enables printing of test data when connected to a PC.
- System Setup: Configures various device settings.
Battery Test Functionality:
The battery test function guides the user through a series of selections to ensure accurate diagnosis:
- Vehicle Type Selection: Prompts the user to select between "Car" or "Scooter (Motorcycle)" battery.
- Battery Type Selection: Requires the user to specify the battery chemistry from options such as Regular Flooded, Lithium Ion, AGM Flat Plate, AGM Spiral, Gel, and EFB battery. Notably, Lithium Ion batteries are exclusively for Scooter (Motorcycle) types.
- System Standard and Rating Selection: Users must select the appropriate system standard and rating (e.g., CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB) as marked on the battery itself. The tester supports a wide range of standards and ratings.
Cranking Test Functionality:
The cranking test assesses the battery's ability to provide sufficient power for engine starting. After selecting "CRANKING TEST," the tester prompts the user to start the engine. It then displays the cranking time and voltage, indicating whether the cranking performance is "Low," "Normal," or if a "BAD CELL" is detected, requiring replacement.
Charging System Test Functionality:
The charging system test evaluates the vehicle's alternator and charging circuit. Users are instructed to start the engine and increase RPM to 2500 for 10 seconds. The tester then displays loaded and unloaded voltages, indicating whether the charging is "Normal," "Low," "High," or has "No Output," and advises on replacement if necessary.
Important Technical Specifications:
The device supports a broad spectrum of battery standards and ratings:
- CCA (Cold Cranking Amps): Specified by SAE & BCI, Lithium Range: 20-1000, Wet AGM EFB Range: 100-2000.
- BCI (Battery Council International): Lithium Range: 20-1000, Wet AGM EFB Range: 100-2000.
- CA (Cranking Amps): Effective starting current at 0°C, Lithium Range: 20-1000, Wet AGM EFB Range: 100-2000.
- MCA (Marine Cranking Amps): Effective starting current at 0°C, Lithium Range: 20-1000, Wet AGM EFB Range: 100-2000.
- JIS (Japan Industrial Standard): Lithium Range: 26A17-150F51, Wet AGM EFB Range: 26A17-245H52.
- DIN (German Auto Industry Committee): Lithium Range: 20-700, Wet AGM EFB Range: 100-1400.
- IEC (Internal Electro technical Commission): Lithium Range: 20-700, Wet AGM EFB Range: 100-1400.
- EN (European Automobile Industry Association): Lithium Range: 20-1000, Wet AGM EFB Range: 100-2000.
- SAE (Society of Automotive Engineers): Lithium Range: 20-1000, Wet AGM EFB Range: 100-2000.
- GB (China National Standard): Lithium Range: 2-120, Wet AGM EFB Range: 30-220.
The test results are displayed on screen, providing detailed information such as:
- Battery Health percentage.
- Charge percentage.
- Measured voltage (e.g., 12.64V).
- Internal Resistance (e.g., 6.1mΩ).
- Rated Amperage (e.g., 500A).
- Overall assessment (e.g., GOOD BATTERY, GOOD, RECHARGE, REPLACE, BAD CELL REPLACE, CHARGE - RETEST).
Usage Features:
- User Interface: The device features an intuitive interface with Up/Down keys for option selection, an Exit key to return to the previous menu, an ENTER key to confirm selections, and an FN key for multi-function operations.
- Connectivity: A Mini-USB Socket is located on the side of the product, allowing connection to a PC for printing data.
- Setup Options: The "System Setup" menu enables users to:
- Select the desired language.
- Configure FN settings for measurement functions (Voltmeter / quick test).
- Adjust LCD display contrast.
- View the firmware version of the tester.
- Operation Flow:
- Connect the red clip to the battery positive (+) terminal and the black clip to the negative (-) terminal. The tester will display its model, version, and battery voltage.
- Press any key to access test options.
- The tester automatically adjusts to surface charge and prompts the user to turn off any circuits drawing power from the vehicle before proceeding with the ENTER key.
- Data Review and Printing:
- The "Review Data" function allows users to view all stored test results directly on the device.
- For printing, the device connects to a PC via a USB cable. A USB driver and print software are included on a CD. Users must clear any previous data in the printer queue before connecting the tester to display and print the data.
Maintenance Features:
- Safety Information: The manual emphasizes critical safety precautions:
- Regularly check test leads, clips, and case insulation for damage. Discontinue use immediately if any breakage or abnormality is found.
- Operate the vehicle in a well-ventilated area during testing.
- Wear suitable eye protection.
- Avoid causing sparks when connecting clips to battery terminals.
- Environmental Responsibility: The product is marked with the WEEE (Waste Electrical & Electronics Equipment) symbol, indicating that it should not be disposed of with general household waste. Instead, it must be separated for treatment, recovery, and recycling of materials. Users are advised to contact their local authority for details on recycling schemes.
The Duratool Battery Tester D03406 is a comprehensive and user-friendly tool for accurately diagnosing the health and performance of SLA and Lithium batteries, as well as the vehicle's charging system, providing clear results and actionable recommendations.