Programming
Operating Instructions 581 - 01.0 - 05/2016104
Step.motor tst
In the subitem Step.
motor tst you can test the stepper motors.
The stepper motors are tested using the associated reference
switches.
To perform the stepper motor test:
1. Select Step.motor tst.
2. Press the button.
3. With the buttons or select the corresponding stepper
motor X … Z.
4. Using the or buttons, the stepper motor moves forward
or back 20 steps.
X = X-direction (transverse movement of the fabric support plate)
Y = Y-direction (longitudinal movement of the fabric support plate)
Z = Z-direction (rotation of the sewing mechanism)
5. Quit the stepper motor test using the button.
NOTICE
Property damage may occur!
Testing the stepper motor can lead to collisions with other
machine elements. There is a risk of breaking.
It is essential that the clamping
plates are removed before
performing the stepper motor test.
To Next Page
Loading...
