Setup
80 Operating Instructions 669 - 00.0 - 08/2019
4. Put the sticker with the safety notice on the front of the main
switch (7)
5. Put the sewing light (1) onto the retainer piece (5).
6. Unscrew the valve cover (6).
7. Route the sewing light’s (1) supply cable into the cut-out on
the machine arm.
8. Guide the the connection cable downwards through the
opening in the tableplate.
9. Fasten the sewing light transformer under the tabletop.
10. Connect the cable of the sewing light (1) to the sewing light
transformer.
11. Put the valve cover (6) back on.
12. Put the arm cover (2) back on.
To Next Page
Loading...
