90
Using the Iron
1. Place the iron onto the heatproof stand or
on the designated heatproof iron-resting
surface on your ironing board.
2. Press the handle rotation button and turn
the handle until it locks in place.
3. If choosing to use the steam function, ll up
the iron with water using the jug provided.
Note: You can return to Dry Iron Mode by pressing the steam button for the
third time.
4. Plug in the power cable into the mains socket and switch on. This will put
the iron into standby mode and the power button will ash orange.
5. Press the power button to turn on the iron. The button will ash blue and
continue to do so while the iron is heating up.
6. Once it has nished heating up and reached the optimal temperature, the
power button light will stop ashing and remain constantly blue.
7. If you wish to use the iron Dry Mode without steam, it is now ready to use.
8. If you wish to use the iron with the Steam Mode, select the level of steam
you need:
• Press the steam button once for less steam (this will light up
orange)
• Press the steam button twice for more steam (this will light up
blue)
To Next Page
Loading...
