7
Operation
Overview
Before using this appliance for the rst time, please clean the appliance. Refer
to the chapter “Cleaning” below.
1. Place the motor base on a at, stable surface.
2. Attach the juice container onto the connector of the motor base.
3. Place the strainer on the container.
4. Place the small cone over the connector.
5. Plug the appliance in the mains power socket.
6. Cut your desired fruit in half to be juiced.
7. Press each fruit half rmly over the small cone or large cone and the
appliance will operate automatically.
NOTE: To use the large cone, simply t it over the small cone.
1. Cover
2. Large cone
3. Small cone
4. Strainer
5. Juice container with spout
6. Connector
7. Motor base
Tip: The large cone can be used
for larger fruit such as oranges
or grapefruit. The small cone can
be used for smaller fruit such as
lemons and limes.
1
2
3
4
5
6
7
To Next Page
Loading...