6
Safety Information
Thank you for purchasing the Duronic OX01R Pulse Oximeter.
This Manual is written and compiled in accordance with the council directive
MDD 93/42/EEC for medical devices and harmonized standards. In case
of modications and software upgrades, the information contained in this
document is subject to change without notice.
Please read this User Manual carefully before using this product and retain for
future reference.
Warning
• Explosive hazard---DO NOT use the oximeter in environment with
inammable gas, for example anaesthetic mixture with air/oxygen or
where there is nitrous oxide. These are highly ammable.
• DO NOT use the oximeter while the user is being scanned by MRI and CT.
Instructions for Safe Use
• Check the main unit and all accessories periodically to make sure
that there is no visible damage that may affect patient’s safety. If used
regularly, it is recommended that the device should be inspected once a
week at least. When there is obvious damage, stop using the monitor.
• You must not attempt to repair or disassemble the oximeter yourself. If the
device requires repair, please contact the Duronic Customer Care Team.
• The oximeter cannot be used together with devices not specied in User
Manual. The only accessories (if any) that can be used with this device are
those recommended by manufacturer.
• This oximeter is calibrated before leaving factory.
To Next Page
Loading...