6
Safety Instructions (Continued)
• Always attach plug to appliance rst, then plug the cable into the wall
outlet. To disconnect, remove plug from wall outlet.
• This appliance is only to be operated in the closed position.
• When setting up your Wafe Maker, ensure that it is placed on a at, even
and dry surface.
• The appliance is not intended to be operated by means of an external
timer or separate remote-control system.
• The temperature of the outside cover surfaces may be high when the
appliance is operating.
PLEASE NOTE: You may notice a faint smoke or odour when rst using the
WM60 Wafe Maker. This is completely normal and should disappear after the
rst few uses.
To Next Page
Loading...