DuroStar ES-1600 User Manual

ECO-SHREDDER BY DUROSTAR
OWNERS OPERATING MANUAL
CHIPPER / SHREDDER / MULCHER MODEL ES1600
SPECIFICATIONS:
Horse Power: 2.5HP
HopperSize:
15-1/4" x 10-3/8"
Side Chute:
1-3/8" x 2-5/16"
R.P.M: 3450
THANK YOU FOR PURCHASING AN ECO-SHREDDER, CHIPPER / SHREDDER / MULCHER.
Your new Chipper/Shredder/Mulcher has been engineered and manufactured to the highest standards of
dependability, ease of use and operator safety. Properly cared for, it will give you years of rugged, trouble-free
performance.
CAUTION: Carefully read through this entire owner's manual before using your
new Chipper / Shredder / Mulcher.
Pay close attention to the Rules for Safe Operation, Warnings and Cautions.
If you use you Chipper / Mulcher / Shredder properly and only for what it is intended, you will enjoy years of safe,
reliable service.
Thank you again for buying DUROSTAR equipment.
SAVE
THIS MANUAL FOR FUTURE REFERENCE

DuroStar ES-1600 Specifications

General

Brand	DuroStar
Model	ES-1600
Category	Paper Shredder
Language	English

Summary

Rules for Safe Operation

Know Your Power Tool

Electrical Shock Prevention

Prevent body contact with grounded surfaces to avoid electric shock.

Personal Safety and Attire

Wear safety glasses, dust mask, hearing protection, and appropriate clothing.

Tool Maintenance and Care

Pre-Operation Checks

Remove all keys and wrenches; never use in explosive atmospheres.

Operator Alertness and Condition

Stay alert, exercise control, and do not operate under influence of substances.

Damaged Parts and Switch Checks

Check for damaged parts and ensure the switch functions correctly.

Assembly and Operation

Assemble Frame and Wheels

Attach Handle

Attach Top Hopper

Operating Instructions

Read safety instructions, connect to power, and use the On/Off switch.

Maintenance and Disassembly

General Maintenance

Jamming Procedures

Switch off, disconnect power, wear gloves, remove obstruction from chamber.

V-Cutter Maintenance

Disassembly Steps

Remove hopper, rotate base, remove center bolt, and dismount V-cutter.

Shredding Blades Maintenance

Assembly Instructions

Operational Details and Troubleshooting

Top Hopper - Front Chute Usage

Side Chute Usage

Overload Protection and Motor Jamming

Overload switch cuts motor; reset after clearing clogs.