Need help?Do you have a question about the Durst Theta 76 and is the answer not in the manual?
General| Print Technology | Inkjet |
|---|---|
| Connectivity | Ethernet |
| Media Thickness | Up to 0.5 mm |
| Operating Systems | Windows, Mac OS |
| Type | Large Format Printer |
| Max Print Width | 76 cm (29.9 inches) |
| Media Types | Canvas, Backlit Film |
| Media Handling | Roll-to-roll |
| Ink Colors | CMYK, Light Cyan, Light Magenta |
| Ink Type | Pigment-based |
Explains four layout options for panels without an in-line cutter.
Explains three layout options for strips with an in-line cutter.
Describes hotfolder setup for automatic spooling and printing of jobs.
Covers file naming conventions and spooling modes for hotfolders.
Explains how Theta 76 uses ASCII files for automated spooling and printing.
Details the basic format structure and codes used in Durst ASCII files.
Lists and explains codes, descriptions, and limits for ASCII file parameters.
Details how to configure hotfolders for ASCII file spooling.
Explains how to create and prepare ASCII files for job instructions.
Describes the process of spooling jobs using ASCII files.
Explains settings required for index printing within Autospooling mode.
Covers logo file, title, dimensions, and background color for index prints.
Allows selection between 'IndexPrint and Images' or 'IndexPrint only'.
Describes manual steps for selecting images and starting the nesting cycle for index prints.
Allows fitting the image to size without cropping or filling the size by cropping.
Implements a function to prevent the last cut when paper roll is low, avoiding waste.
Uses cursor and cropping marks to maintain aspect ratio during image resizing.
Allows opening multiple files to preview in thumbnail size for inspection.
Enhances correction calculations based on density strip readings for better accuracy.
Calibrates for non-linear intermittency across multiple densities for better compensation.
To Next Page
