DustBuddie
®
for 7-1/4” Worm Drive Circular Saws
• Point-of-origin dust
collection keeps the
workplace safe and
clean
• No tools required for
easy installation
• Allows clear line of
sight to blade
• Non-marking wheels
glide over the work
surface
17450 440006 5
DustBuddie for 7-1/4" Worm Drive Saws
D4000
DustBuddie
®
Dust collection for 7-1/4” Worm Drive Circular Saws
Includes:
Captures 99%
of Concrete Dust
DustBudd ie
®
Dust collection for 7-1/4”
Worm Drive Circular Saws
Without With
6 non-marking
wheels built in
1” incremented
cut guide
Find more dust control solutions at:
www.DustlessTools.com
Releasable Tie
Dust Shroud
Optional Rear Rubber
Dust Shield
Spacer
Primary Front Rubber
Dust Shield
Soft Swivel Hose Cuff
Works great on
Concrete • Cement board • Fiberglass • Stone products
A vacuum rated for 120 CFM or greater is recommended,
such as our Dustless HEPA Wet+Dry Vacuum.
Patent Pending
DustBuddie
®
Dust collection for 7-1/4”
Worm Drive Circular Saws
WARNING: This product contains one or more chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
To Previous Page
Loading...