7、The gateway turns on Bluetooth
1. Open the dusungwmanage_1.0.2. exe tool and find the corresponding wan
address through the MAC address of the gateway
2. Open Secure CRT, click the quick login in the upper left corner, enter the wan
address of the gateway, and enter the username: root, password: root to log in.
3. Input instructions:
bletxpr 100 , Open the Bluetooth
4.
Connect paired Bluetooth devices for pa
iring
8、The gateway opens
ZWAVE
1. Open the dusungwmanage_1.0.2. exe tool and find the corresponding wan
address through the MAC address of the gateway
2. Open Secure CRT, click the quick login in the upper left corner, enter the wan
address of the gateway, and enter the username: root, password: root to log in.
3.Connect paired ZWAVE devices for pairing
9、Gateway on wifi
Pres
s [DSI_0134] gateway reset key for 2 seconds, the green light of the gateway is
always on, the red light is flashing, and the gateway wifi is automatically opened.
10、Gateway opens Zigbee
1. Open the dusungwmanage_1.0.2. exe tool and find the corresponding wan
address through the MAC address of the gateway
2. Open the browser and enter the wan address. Enter account number: root and
password: root.
3. After entering the page, click Dusun, click zigbee3.0 Manage, and then click the
Permit button.
4. At this time, the yellow light of the gateway flashes, and the gateway enters the
zigbee distribution network state.3Connect paired Zigbee devices for pairing.
To Next Page
Loading...
