Duux Bright - Product Overview and Safety; Safety Warnings and Precautions; Prohibited Placement Locations

54
be used. Exceeding the rated value may cause
overheating of the power cord or re.
• Do not touch the power plug with wet hands,
otherwise it may cause electric shocks.
• Do not place a nger or a metal object into a
gap such as an air intake or air outlet. Contact
with the internal components may cause electric
shock or injury.
• Make sure the device does not get wet.
Otherwise it may cause re or electric shock due
to short circuit.
Do not put in the following places:
• Unstable places. Otherwise the device may fall or
tumble, which can cause injury or result in electric
leakage, electric shock or re.
• Places like bathrooms which have high
temperature, high humidity or which may get the
device wet. This may cause electric leakage in the
device and result in electric shock or re.
• Places like kitchens where cooking fumes are
exhausted.
• Places where oil or combustible gas is used and
leakage may occur. A re or smoke may occur
due to a re or the suction of hot gas by the
device.
• Any place where the air outlet directly faces
animals or plants which may cause air drying.
1. Product overview 2. Installation and use
Note: Please take notice of below instructions
and the separately included warning sheet before
using the product.
Attention
In order to avoid the possible damage to yourself
or others, make sure to note the following safety
notes.
Warning
In order to avoid accidents such as re or electric
shocks, please understand the following safety
notes:
• Do not pull the power cord during movement
or storage. It may cause short circuit or cord
damage, and may further result in a re or
electric shock.
• Do not damage the power cord or the socket.
• Do not cut, ret, excessively distort, pull or twist
the power cord; Do not place heavy objects on
the power cord or extrude the power cord as it
may cause electric shock or re.
• When it is required to repair the power cord or
plug, please contact an electrical service center.
• Do not use any power supply, universal socket
or connection device that exceeds the rated
value, only the 220V 50Hz AC power supply can
EN
Air inlet
Operating panel
and indicator lights
Air outlet
Power cord
PM2.5 sensor
4
2
1
3
5
EN