Duux Mistral - Using the Drainage Hose

8
Using the drainage hose
Note: Please check that the power is o before
removing the water tank from the device.
Attention: Never connect the draining hose
during operation.
1
Remove the water tank and remove remaining
water;
2
Connect the draining hose to the water outlet
pipe;
3
Place back water tank while guiding the
draining hose through the slot opening;
4
Place the end of the drainage hose in a water
outlet or large container.
Attention: Please make sure the end of the hose
is lower than the water outlet pipe, otherwise the
water will not drain and ooding may occur.
1
2
3
4