Detail
The Detail option lets you change the color mode, chroma,
sharpness, focus settings, long exposure, ISO, metering, and
digital zoom settings.
1. Press the menu button to display the menu.
2. Use the joystick (left and right) to highlight the DETAIL
option and press the center joystick button to confirm. The
detail submenu is displayed.
3. Use the joystick (up and down) to highlight a detail setting
and press the joystick right button to confirm.
4. Use the joystick (up and down) to highlight a setting.
5. Press the center joystick button to confirm and exit the menu.
The color mode can be set to color, black and white, or sepia.
Chroma and Sharpness can be set to standard or increased or
decreased. The focus mode can be set to auto, area spot, or
anual.
m
Auto focus is entirely automatic. Area spot focus will cause
the camera to focus just on the area in the center of the
picture marked with a cross on the LCD screen. Manual focus
lets you choose an area (center, up, down, left, or right) on
hich to focus using the joystick control.
w
The long exposure setting can be set to off, 2, 4, 6, or 8
seconds. The ISO setting can be set to auto, ISO100, ISO200,
or ISO400. Metering can be set to matrix (average over
picture), center weighted, spot (in the center of picture), or
the auto focus area. The digital zoom can be turned on or off.
All detail settings remain active until you change them.
3.6 Scene mode
To Next Page
Loading...
Need help?
General
