Dymo Compact User Manual

DYMO I.D. (3/8" and 1/4" Tape)
DYMO Compact (3/8" Tape)
Insert the embossing tape into the
slot located at the top of the tape
compartment.
Open the door located on the handle.
Extend the embossing tape about
two inches. This will allow for
easier loading of the tape.
Turn the wheel to select the desired
character. Once you’ve selected the
character you’d like to emboss,
firmly squeeze the handle.
Close the tape compartment door.
Squeeze the handle a few times to
help feed the tape through the unit.
Turn the wheel and select the
Squeeze the handle to cut the tape.
Remove the backing and apply
the tape to the desired surface.

Dymo Compact Specifications

General

Brand	Dymo
Model	Compact
Category	Accessories
Language	English

Summary

Using the DYMO Compact Embosser

Loading the Embossing Tape

Open the handle door and extend the embossing tape about two inches for easier loading.

Inserting Tape into Compartment

Insert the embossing tape into the slot at the top of the tape compartment.

Feeding the Tape

Close the tape compartment door and squeeze the handle multiple times to feed the tape.

Selecting and Embossing Characters

Turn the wheel to select characters, then squeeze the handle to emboss.

Cutting the Embossed Tape

Squeeze the handle to cut the tape after selecting the desired character.

Applying the Tape

Remove the backing from the tape and apply it to the desired surface.