4 Replacement Procedures 4.13 CLICK PAD
4-54 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
4.13 CLICK PAD
Removing the CLICK PAD
To remove the CLICK PAD, follow the steps below and refer to Figure 4-18.
NOTE: (5G model) Remove MIMO2 ANTENNA first before removing the CLICK PAD.
1. Peel off the AL TAPE.
2. Peel off the CLICK PAD from the COVER ASSY.
NOTE: Do not reuse the removed AL TAPE and CLICK PAD. Be sure to use new ones.
Figure 4-18 Removing the CLICK PAD
CLICK PAD
AL TAPE
Rev.01
To Next Page
Loading...
