dynabook PORTEGE X30W-J - Page 197

4.13 CLICK PAD 4 Replacement Procedures
PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-55
Installing the CLICK PAD
To install the CLICK PAD, follow the steps below and refer to Figure 4-18.
1. Stick a new CLICK PAD to the COVER ASSY.
2. Turn over the COVER ASSY and stick a new AL TAPE in place.
NOTE:
1. When replacing the CLICK PAD with a new one, replace the D TAPE PAD on the
COVER ASSY with a new one in place.
2.(5G model) Stick a new MIMO2 ANTENNA in place.
CLICK PAD
D TAPE PAD
AL TAPE
Rev.01