4 Replacement Procedures 4.18 KEYBOARD
4-68 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
4.18 KEYBOARD
Removing the KEYBOARD
To remove the KEYBOARD, follow the steps below and refer to Figure 4-24 and 4-25.
1. Peel off the INSU KB LOW or INSU KB LOW 5G.
NOTE: Do not reuse the removed INSU KB LOW or INSU KB LOW 5G. Be sure to
use a new one.
Figure 4-24 Removing the KEYBOARD (1)
INSU KB LOW or INSU KB LOW 5G
Rev.01
To Next Page
Loading...
