dynabook PORTEGE X30W-J - Page 211

4.18 KEYBOARD 4 Replacement Procedures
PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-69
2. Remove the following screw securing the KEYBOARD.
 M1.21.1B S-THIN HEAD screw 63
3. Remove the KEYBOARD.
NOTE: The KEYBOARD is very thin, so be careful of handling.
Figure 4-25 Removing the KEYBOARD (2)
KEYBOARD
M1.2x1.1B S-THIN HEAD