dynabook PORTEGE X30W-J - Page 212

4 Replacement Procedures 4.18 KEYBOARD
4-70 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Installing the KEYBOARD
To install the KEYBOARD, follow the steps below and refer to Figure 4-24 and 4-25.
1. Set the KEYBOARD to the COVER ASSY in place and secure it with the following
screws.
 M1.21.1B S-THIN HEAD screw 63
2. Stick a new INSU KB LOW or INSU KB LOW 5G to the COVER ASSY in place.
NOTE:
1. Prepare INSU KB LOW for non 5G/LTE model, INSU KB LOW 5G for 5G and LTE
model.
< INSU KB LOW > < INSU KB LOW 5G >
Rev.01