3 Tests and Diagnostics
3-8
[CONFIDENTIAL] dynabook PORTEGE A30-E/TECRA A30-G,-J/dynabook S Series Maintenance Manual (960-931)
3.4 Heatrun Test
The Heatrun test is an automatic test program that executes the following tests successively.
1. Main Memory test
2. Sequential Read Test
3. V-RAM Memory test
To execute this test, select 2 from the test program menu (Top Menu), and press Enter.
Explanation of each test;
1. Main Memory test
Refer to Subtest 1 of 3.6 Memory Test
2. Sequential Read Test
Refer to Subtest 1 of 3.7 Hard disk/SSD Test
3. V-RAM Memory test
Refer to Subtest 2 of 3.6 Memory Test
To terminate the program, press SHIFT + Q.
To Next Page
Loading...
