dynabook S Series - Page 120

3 Tests and Diagnostics
3-20 [CONFIDENTIAL] dynabook PORTEGE A30-E/TECRA A30-G,-J/dynabook S Series Maintenance Manual (960-931)
3.11 FAN Test
To execute the FAN Test, select 6 from the test program menu (Top Menu), press Enter and
follow the directions on the screen.
This test checks if FAN works properly.
FAN Low-speed ... Target Low: XXXX Rpm Result Low: XXXX Rpm OK/NG
FAN High-speed... Target High: XXXX Rpm Result High: XXXX Rpm OK/NG
OK appears in the display if the test ends without an error.
NG appears in the display if an error is found during the test.
To back to the main menu screen, press ENTER.