3 Tests and Diagnostics
dynabook PORTEGE A30-E/TECRA A30-G,-J/dynabook S Series Maintenance Manual (960-931) [CONFIDENTIAL] 3-23
If any errors occurred, “FAIL” will be displayed.
Select “Close” button at the lower left to back to the start screen.
Any errors occurred during this program will be registered in the log. To check the content,
select “LogInfo.” button. As for the details of the log, refer to “3.13.1 Log” section.
When “Close” button is selected, the PC will restart. Press F12 and select the USB memory
as the boot device. Then this program will return to the original test program screen.
3.13.1 Log
< To check the log contents without save >
Touch "Log Info." to display the “Log Information Display”.
To Next Page
Loading...
