13
4.3 Issues may occurred [Rev01]
4.3.1 Not Support System
When the maintenance tool boot from a PC that the motherboard is not supported
(which is a machine that has no
applicable BIOS rom file)
, it will be displayed like below (as previously shown in “2.1.4 File Select & Use”):
Note: Supported motherboard can be configured in “\bin\MBLIST.TXT”, one line for one supported motherboard like
below, it will compare to the baseboard product in Type2:
(Below “DBIIP300” is configured as a supported motherboard.)
4.3.2 No Writeable BIOS (EC) FW File
When there is no writeable BIOS (EC) FW file “KN16RV***_40W.rom” in “\data” folder, it will be displayed like below:
4.3.3 Secure Flash Rom Verify fail
When you use “BIOS Update (when motherboard is NOT replaced)” menu to update BIOS (EC), if you update it from a very
old version to the newest version, below issue may occurred, try to update it to a adjacent version first to avoid this:
To Next Page
Loading...
