NO.
CONT.ON 32 PAGE NO.31
The detail of the error will be recorded to the WPETD log file as below.
Message Explanation Remarks
File Access Error. xx:. Failed in accessing the file.
XX is the SD storage card drive letter.
Space Size Error. xx: There is no free space for creating the file.
XX is the SD storage card drive letter.
4) Test file
WinPETD.exe: Test program.
4-2-5 ODD Test
1) Test contents
This test reads the data file in an optical medium (*1) in the drive (External drive is also available) to check if it reads the data
correctly. The test reads 64MB data from the file.
Note (*1):
As explained in “2-2ts”, you have to prepare an optical medium including the test data file “CDDTEST0.DAT” in the root
folder.
2) Test screen
3) Result judgment
■ In case of PASS
“OK” is shown in the “Result” field on the “Diagnostics” dialog.
The pass count is shown in the “PASS” field.
■ In case of FAIL
“NG” is shown in the “Result” field on the “Diagnostics” dialog.
The pass and error count are shown in the “PASS” and “ERROR” fields respectively.
4-2-6 WIRED LAN Test
1) Test content
This test checks if the data is sent and received without timeout between the built-in LAN device and DHCP server. The 32-packet
sized data is sent from the PC and will confirm to get the response from the server.
The check is executed 5 times for 1 Pass.
Note that, it is necessary that the IP Address has to be assigned to the Wired LAN adapter by a DHCP server for executing the test.
If you use an attached Wired LAN adapter such as a USB LAN adapter, remove it from the PC as WPETD cannot detect the built-in
adapter correctly.
2) Test Screen
To Next Page
Loading...
