NO.
CONT.ON 34 PAGE NO.33
2) Test screen
▼The current test … ALU or FPU
▼Progress status … Test progress by the progress bar.
3) Result judgment
■ In case of PASS
“OK” is shown in the “Result” field on the “Diagnostics” dialog.
The pass count is shown in the “PASS” field.
■ In case of FAIL
“NG” is shown in the “Result” field on the “Diagnostics” dialog.
The pass and error count are shown in the “pass” and ”error” fields respectively.
The detail of the error is recorded in the log file as follows.
Message Explanation
The ALU test made an error. An error occurred during ALU test.
The FPU test made an error. An error occurred during FPU test.
4-2-8 GRAPHICAL DISPLAY Test
1) Test contents
This test will go through a series of solid color screen test followed by H pattern test and circles/line-gradation/ASCII-characters
test and as follows:
The current test
Progress status
To Next Page
Loading...
