dynabook SATELLITE PRO C50-H - Page 94

NO.
CONT.ON 47 PAGE NO.46
Copyright (C) 20
20
Dynabook Inc., All Right
s
Reserved.
[TIMER]
pass count=68
error count=0
test mode=Detail
[KEYBOARD]
pass count=1
error count=0
test mode=Detail
[LED]
pass count=1
error count=0
test mode=Detail
[CPU FAN]
pass count=1
error count=0
test mode=Detail
[TOUCH PAD]
pass count=1
error count=0
test mode=Detail
[BATTERY CAPACITY]
pass count=1
error count=0
test mode=Detail
[BATTERY OFF]
pass count=1
error count=0
test mode=Detail
Note: Start Time, Finish Time and Diagnostics Time
:
[STATISTIC]
:
Start Time=2019/03/24 23:45:07
Finish Time=2019/03/24 23:46:55
Diagnostics Time=00:01:44
:
:
As you see in the example above, “Finish Time - Start Time” does not equal to “Diagnostics Time” usually.
Start Time: The time when you push the [START] button.
Finish Time: The time when all tests you selected finish
Diagnostic Time: The time shown at the top-right on the Diagnostics dialog.
Diagnostic time starts when the first test starts and ends when all selected tests finish.
There is some time interval between being pushed the [START] button and the first test starts.
That is why the value "End Time - Start Time" is usually bigger than "Diagnostic Time".