4.6 HDD 4 Replacement Procedures
4-17 Satellite Pro L50-G / dynabookP*-C* MaintenanceManual
Figure 4-6 RemovingHDD chassisand HDD cable
CAUTION: Do not apply pressureto the topor bottomof the drive.
Installing theHDD
Install HDD according to the following proceduresandFigures 4-5 and4-6.
CAUTION: To avoid damage,alwayshold the HDD only by its sides.
1. Insert four latcheson HDD Bumper andHDD Cable to HDD pack.
CAUTION: To preventthe HDD bracketfrom beingdistortedwheninstalling the HDD
pack into the computer, do not pressthe center of the HDD pack. Alwayshold the HDD
pack byits sides.
2. PlaceHDD packinto the correct position in the computer, holding the HDD pack by
its sides.
3. Connect HDD cable to CN1700 on systemboard.
To Next Page
Loading...