dynabook Satellite Pro L50-G - Installing the Wirelesslan Card; Installing Wirelesslan Card

4.8 Wireless LAN Card 4 Replacement Procedures
4-21 Satellite Pro L50-G / dynabookP*-C* MaintenanceManual
Installing WirelessLAN Card
Install Wireless LAN Card according to the following proceduresandFigures 4-8.
1. Insert Wireless LAN Card into CN1300 on systemboard.
2. Pressdown Wireless LAN Card to secureit with oneM2.0x2.0 black Phillips head
screw.
3. Connecttwo antennacablesby pressing them firmly into place.
4. Route antennacablesaccording to Figures 4-8, avoid to pinching the cables.
Cable can’t route on the connector or copper pad.
5. Stick tapesto fasten antennacablesaccording to Figures 4-8, avoid to stick on
connector or copper pad.
CAUTION: Do not touch the connectors on the Wireless LAN Card and in the computer
with your bare hands.Wireless LAN Cards can fail if they are contaminatedwith sweat,
natural oils, etc. from your hands.