dynabook Satellite Pro L50-G - LCD Module Assembly; Removelcd Module Assembly

4.10 LCD Module Assembly 4 Replacement Procedures
4-25 Satellite Pro L50-G / dynabookP*-C* MaintenanceManual
4.10 LCD Module Assembly
NOTE: Touch SKU will providethe FRU partsasLCD Module Assembly.
RemovingLCD Module Assembly
RemoveLCD Module Assembly according to the following proceduresandFigure 4-11.
1. Removetape for fasten LCD cable.
2. Disconnect LCD cablefrom CN3000 & CN3001(Only Touch SKU) on systemboard.
3. Tear three mylar on top cover to releaseAntenna cables.
4. Releasedwireless antennacables from top cover.
5. Open LCD Module Assembly at an angle of 90 degrees.
6. Removefour M2.5x4.0 black Phillips headscrewssecuring LCD Module Assembly
with top cover.
7. RemoveLCD Module Assembly.
Figure 4-11 Removingthe LCD Module assembly