2 Troubleshooting 2.12 USB Port
2-20 SatellitePro L50-G / dynabookP*-C* MaintenanceManual
2.12 USB Port
Procedure1 Windows Application Test
Procedure 2 Connector Check and Replacement Check
Procedure 1 Windows Application Test
Procedure 2 Connector Check and Replacement Check
Check1 Make sure USBdevice cable hasbeen firmly connected to USBPort of
SystemBoard. Also make sure USBPort on SystemBoard is free of foreign
matters.
Check2 SystemBoardmaybe faulty. Replaceit with a new one following the steps
described in Chapter 4.
USB Port
System Board