2.22 Bluetooth 2 Troubleshooting
SatellitePro L50-G / dynabookP*-C* MaintenanceManual 2-31
2.22 Bluetooth
Procedure1 Windows Application Test
Procedure 2 Connector Check and Replacement Check
Procedure 1 Windows Application Test
Procedure 2 Connector Check and Replacement Check
Check1 Make sureBluetooth module hasbeen firmly connectedto the connectoron
the systemboard. Alsomake sureBluetooth module is free of foreign
matters.
Check2 Bluetooth Module maybe faulty. Replaceit with a new one following the
stepsdescribedin Chapter 4. If Bluetooth Module replaced isstill not
functioning properly, perform Check3.
Check3 SystemBoard may be defective. Replace SystemBoard with a new one
following the stepsdescribedin Chapter 4.
Bluetooth
Module
System Board