Microphone Array
This tab allows you to set Main Volume, Microphone Effects and Default
Format.
Device advanced settings
This tab allows you to choose the type of headphone or microphone and
select devices when an external device is plugged in.
To choose the type of headphone or microphone, do the following:
1. Plug a headphone or microphone into the headphone/microphone
jack.
2. Click the Device advanced settings tab.
3. Select one from the device list under ANALOG for the device you
plugged into.
When an external headphone or microphone is plugged in, you can turn
on/off the multi-stream function for playback or recording under Playback
Device or Recording Device in this tab.
To use multi-stream function for playback/recording, do the following:
1. Select Make internal and external output devices playback two
different audio streams simultaneously, or Separate all input
jacks as independent input devices.
2. Click Start ->
(Settings) -> System -> Sound.
3. Click App volume and device preferences under Advanced sound
options.
4. Choose different output/input devices for different players/recorders
from the drop-down list.
Power Management
This tab allows you to adjust the configuration of audio power management
to achieve the power saving.
Information
This tab shows the driver version and UI version as well.
Video mode
Video mode settings are configured via the Display dialog.
To open the Display dialog, click Start -> (Settings) -> System ->
Display.
If you are running some applications (for example a 3D application or video
playback), you might see some disturbance, flickering, or frame dropping
on your screen.
User's Manual 4-24
To Next Page
Loading...