Sign-in to Windows
Unlock the password-protected screen-saver.
Authentication of the User Password (and, if applicable, the HDD/SSD
Password) when booting up the computer (Pre-Boot authentication).
Single Sign-On feature
Fingerprint cannot be used in models that do not have a fingerprint
function.
Total fingerprints which can be registered are 10 pcs per account.
How to Enroll your Finger
The method of enrolling your fingerprint might vary depending on the model
you purchased. You can choose one of the following ways to enroll.
Align the first joint of the finger to the center of the sensor. Lightly
touch the sensor and swipe finger levelly towards you until the sensor
surface becomes visible. In performing this process, you should also
take care to ensure that the center of your fingerprint is on the sensor.
Figure 4-6 Enroll the finger
1. Sensor
Lightly touch and rest your finger on the fingerprint sensor to
recognize fingerprints. During enrollment, you might need to touch and
lift your finger on the sensor repeatedly until setup is complete.
User's Manual
4-15
To Next Page
Loading...
