Dynabrade 40324 - User Manual

To Next Page

Disassembly Instructions - 0.5 hp. Dynafile II

Models: 40320, 40321, 40324, 40326, 40330, 40335

Important: Use these instructions along with the tool parts page or manual.

Notice: Shut off the air supply and depress throttle lever to deplete remaining air.

• Carefully disconnect the tool from the air supply hose. • Remove the abrasive belt and contact

arm assembly. • Use the Special Repair Tools designed for the disassembly and assembly of

this motor.

Motor Disassembly:

1. Use a 9/64" hex key to loosen the 95311 Screw. Remove the motor from the belt housing.

Use a 9/64" hex key to

loosen the 95311 Screw.

Need help?

Do you have a question about the Dynabrade 40324 and is the answer not in the manual?

Dynabrade 40324 Specifications

General