EasyManuals Logo

Dynacord Speaker User Manual

Dynacord Speaker
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
COMPONENTS
50
Components
VariLine
CROSSOVERS
Throughout the VariLine series,
only selected components of the
highest quality are used.
These include not only the cross-
overs and signal processors but
also DYNACORD‘s innovative pro-
tective circuits: the individual loud-
speaker components are safeguar-
ded from thermal overload by the
all-electronic Voice Coil Tracking
Protection system as well as halogen
protectors. VariLine loudspeakers
can therefore be driven by extre-
mely powerful amplifiers to obtain
the widest possible dynamic range
without their voice coils sustaining
damage – even when operating
errors occur. Furthermore, any
thermal overload triggers a ‚soft‘
power reduction, free from the dis-
tracting switching noise that is the
bugbear of conventional protective
circuits. The 12“ and 15“ models
offer the additional option of swit-
ching to active two-way operation.
HORNS
The large-format VariLine
constant directivity HF horns have
been optimized using advanced
CAD software and can be rotated
through 90° for horizontal applica-
tions.
As well as exemplarily low distortion,
these horns are remarkable for the
very low frequencies at which they
retain their directivity. The smaller
enclosures are equipped with
Electro-Voice DH3 titanium domes,
whilst the VL 122 and larger
models feature Electro-Voice ND6
neodymium drivers with 3“ voice
coils and 1.4“ exits. These advan-
tageous horn / driver configura-
tions provide crisp and powerful
high-resolution HF reproduction.
CONSTRUCTION
VariLine enclosures are made
from extremely rugged, multiply
birch with a dual-component
finish sufficiently resilient to
withstand the roughest of handling
on the road and on stage.
The front is protected by a sturdy
powder-coated steel grille lined
with high quality acoustic foam.
The logo can be rotated through
90° and therefore looks right whether
the enclosures are mounted verti-
cally or horizontally. The 12“ and
15“ enclosures are asymmetric,
which not only optimizes them for
oor monitoring but also facilitates
the creation of clusters.
dc loudspeaker_en_reprint062010.indd 50dc loudspeaker_en_reprint062010.indd 50 09.07.10 12:1909.07.10 12:19

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynacord Speaker and is the answer not in the manual?

Dynacord Speaker Specifications

General IconGeneral
BrandDynacord
ModelSpeaker
CategorySpeakers
LanguageEnglish

Related product manuals