Dynacord Speaker User Manual

SUB 18 AND SUB 28
57
These are mounted on the back
to provide easy and convenient
transport.
The SUB 28 is switchable between
1 x 4 Ω and 2 x 8 Ω operation, in
which case the signal for Subwoofer
A is on pins 1+ / 1-, and that for
Subwoofer B on pins 2+ / 2-, of the
Speakon connectors.
When driven by DYNACORD SL,
LX or PowerH series amplifiers, a
single four-pole cable connected
to Channel A is all that is needed
to drive both woofers.
dc loudspeaker_en_reprint062010.indd 57dc loudspeaker_en_reprint062010.indd 57 09.07.10 12:2009.07.10 12:20

Dynacord Speaker Specifications

General

Brand	Dynacord
Model	Speaker
Category	Speakers
Language	English